Should I Repair Or Replace My Kitchen Faucet?

Kitchen faucets last for about 10 to 15 years depending upon their material quality and maintenance. But, all fixtures like kitchen faucets wear out someday. For minor issues, you can use DIY tricks to fix things. But for major issues, you need to get your faucet replaced. Look for the problem analyze them and then conclude whether it needs a repair or replacement.

We shall discuss your faucet’s problem and declare its type of treatment in the following session.

In this article, we have discussed when you can take the DIY route and when you should consider replacing your entire faucet.

Let’s dive right into the topic.

When Can You Consider Repairing Your Faucet?

Your faucet should be analyzed completely for any damages, even if a small change in your faucet needs to be treated for avoiding heavy damage later. These faucets come in various types, some materials would naturally cause damage and some lead to cause damage due to the quality of water and usage. Here are some damages that need to be considered for repair.

1. Dripping faucet

Leakage in a faucet is a usual thing caused for many reasons even when we fail to close the faucet properly it may cause it to drip or when there’s a high flow of water and there may be any internal damage. But constant leaking even after the faucet is properly closed is problematic.


Probably dripping would cause in areas like the O-ring, valve, or corroded washer. It can be repaired by simply cleaning or tightening them. You can put rubber rings on them and stop the sound. If their internal damages cause severe problems do go for replacement.

2. Spitting

The faucet needs to give an undisturbed flow of stream but when it starts to flow irregularly it needs to be repaired. When there is any stuck in the faucet valve or any damage in the inner parts spitting would happen.


You can remove the part clean the dirt particles and tighten them. If the problem persists go for replacing them.

3. Squeaking

Squeaking generally occurs while opening and closing your faucet valve, it happens due to dryness or rusting.


You can remove the part and treat it by applying oil or a suitable grease to reduce the squeaking sound.

4. Mineral buildups

They are caused both on the outer and inner surfaces of the faucet, it is due to the hard water supply or poor cleaning. These strains make the outer appearance pale and unimpressive.


Certain tightening and cleaning are mostly DIY, for advanced and proper cleaning you can call professionals for help. The cost involved in repairing would not exceed much, spend for experts and for minor tools. You can buy some cleaning agents for repairing like vinegar, baking soda, and detergents, which may also be available in your home.

When Should You Consider Replacing Your Faucet?

1. Age-old faucet

Every type of faucet has its lifetime and warranty after a certain period the faucet needs to be replaced for better performance. Though your faucet worked property on nearing its warranty time check all the interior and exterior parts. Even small damage left untreated would turn the complete faucet fail.

2. Frequent repair

You can repair the minimal damage and use them again but persistent damage and repair need to be replaced. There’s no guarantee of constant repairing faucets on providing clean and safe running water. Instead of spending on repairing sessions, you can invest in a good replacement.

3. Upgrade for efficiency

Whether you want to upgrade the kitchen, or your work exceeds needing a better faucet in size and quality there you can replace your existing faucet with a new one. If you need any advanced and modern faucet techniques like a touchless one, first check on the touchless kitchen faucet reviews and then buy them. The older model faucets are simple designs that waste lots of water you can swap them with a well-conserved water faucet.

4. Damaged parts

The faucet parts may get rusted internally before appearing in the outer layer making the water flow slow and uneven, it also damages the water quality. In many cases, the mineral buildups damage the faucet making it difficult to clean them. For all these reasons replacement is the better choice.

Cost of replacing and repairing a faucet

Many replacements like minor faucet parts would not consume more money. For replacing the whole thing or major parts it would consume according to the model and material type. However, the average cost of replacing a faucet would cost between $150 to $400, you can look for the best kitchen faucet brands and replace them. Every replacement cannot be done by yourself. Sometimes you need to get professional help whi

Bottom line

Every faucet must be checked constantly whether they are working properly, if it has any minor defects or leakage you can go for a DIY repair session with a piece of proper knowledge. When you have major defects or need to upgrade the flowing technique you can opt for replacing the faucet with a new one on the professional’s advice and guide.

Disclaimer – The images inside the article were collected from the internet. We do not own any of them.

Leave a Comment